​Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer

Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer

A new and innovative floor lacquer has just landed in Ireland. A product that provides all the advantages of a two pack floor lacquer but without all the disadvantages. The product is 100% fume free, has a built hardener, it is compatible with all high traffic wood floors and it maintains the wood in a natural finish. The new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer is also very easy to apply and it dries in a matter of minutes. Non glazing, fume free and non yellowing.

• The estimated coverage area is around 12 sq meter per 1L
• The estimated drying period is between 2 to 4 hours
• The product penetrates the surface in full and it does not glaze
• It is compatible with all semi solid and solid hardwood floors
• It can be used for sealing high traffic commercial floors
• Not compatible with oil based wood stains but compatible with water based stains
• It provides superior protection against black marks, high heels & scratches

Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer | How To Use It

You can apply the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer over new, newly sanded and pre-existing finishes. The product can be used as a recoating agent over dull looking water based and solvent based floor lacquers. Not compatible with hardwaxes or floor oils.

Old Floors | Before using the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer, the surface has to be deep cleaned and lightly abraded with 150 grit sanding paper to create some roughness. Then 1-2 coats of floor lacquer will seal the floor

New Floors | Even if the floor is brand new, it will require a very light sanding or buffing with 100 grit sandpaper to remove all rough patches and imperfections. Then 1 primer and 2 coats of floor lacquer will do the job.

Tools Needed : 1 varnishing bucket, 1 varnishing roller, 1 roller frame, 1 pole | handle & 1 small varnishing brush

Start by applying the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer around the edges. Apply enough product to make it look wet but do not over soak it. Use the varnishing roller to apply the floor lacquer over the larger floor areas. Apply 1 coat of floor primer and two coats of floor lacquer with about 2 hours break between the coats. Do one more fine sanding after the first coat of sanding. A second super fine sanding can also be done after the second coat as well but is not necessary.

Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer | Recommendations

Do not mix the product with any hardener. Do not use the new Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer over wood stains. Suitable for indoor use. Keep it away from children and pets. Store the product in a cool and dark place.

Bona Traffic Go | 2K Technology | High Traffic Floor Lacquer